Ecore E-Grip III Adhesive, 4 gal pail

E-Grip III Adhesive is a zero-VOC, low odor, one-component urethane adhesive formulated for use with Ecore flooring surfaces. In a 4-gallon pail, Ecore E-Grip III features improved tack properties, helping to keep seams tight. E-Grip III has been specifically engineered to be solvent-free. Moisture-cured, no-mix, non-sag and permanently elastic formula. Excellent adhesion to elastomers, concrete, and wood in both indoor and outdoor applications. No mixing required.

Coverage Rates:
120 square feet/gallon: 1/16-inch by 1/32-inch by 5/64-inch U notch trowel
95 square feet/gallon: 1/16-inch by 1/16-inch by 1/16-inch square notch trowel
60 square feet/gallon: 1/8-inch by 1/8-inch by 1/8-inch square notch trowel

Ecore E-Grip III Adhesive should be applied to substrate as indicated in each adhering to specifications for trowel notch, substrate moisture limits, floor/ambient temperature range, working and open times. Read full product label, safety data sheet, and product information sheet for all safety precautions and use information.

Adhesive type: Single component polyurethane
Use: Indoor & Outdoor; Rubber Composite & Heterogeneous Sheet vinyl floors as specified.
Antimicrobial: Yes
Maximum RH: 85% per ASTM F-2170
Freeze-thaw stability: Stable (freezing will not harm adhesive)
Application temperature: 40°F - 100°F
Working time: 30-40 minutes
Shelf life: 1 year
Credentials: Meets Collaborative for High Performance Schools (CHPS); Low-Emitting Materials criteria (CA Section 01350)