Product Description
E-TAK 99 Adhesive is an aggressive, pressure sensitive adhesive approved for interior use with Performance Vinyl Tile (PVT), LVT/LVP and solid vinyl sheet flooring, and Vulcanized Composition Rubber sound control underlayment.
FEATURES AND BENEFITS • Aggressive tack properties • High moisture resistant • Up to 2 hours of working time • Low odor and VOC content WHERE TO USE • Approved for interior use with Performance Vinyl Tile (PVT), LVT/LVP and solid vinyl sheet flooring, and Vulcanized Composition Rubber sound control underlayment. LIMITATIONS • Do not install over substrates containing asbestos. • For interior installations only • Install flooring only in areas that are recommended by the flooring manufacturer. • Do not install into wet adhesive over non-porous substrates. • Do not apply directly over any adhesive residues, including cutback adhesive. • Do not install in areas with hydrostatic moisture, osmotic blistering, or alkali silica reaction conditions. • Use only when the substrate temperature is between 65°F and 90°F (18°C and 32°C). • Do not install unless the surface temperature of the substrate is 10°F (5°C) above the dew point. • Do not install when the relative humidity (RH) of the concrete slab (ASTM F2170), or the pH, exceeds the limits listed in the table below.
